Garmin Edge 500 - Manual (Page 15)

Edge 500 Owner’s Manual 
Training with Your Edge
Using Auto Lap by
Position
You can use Auto Lap to automatically
mark the lap at a specific position.
This feature is helpful for comparing
your performance over different parts
of a ride (for example, a long climb or
training sprints).
1. Press and hold
MENU .
2. Select Settings > Bike Settings >
Auto Lap .
3. In the Auto Lap Trigger field,
select By Position .
4. Select an option:
Select Lap Press Only to
trigger the lap counter each time
you press LAP and each time
you pass any of those locations
again.
•
Select Start And Lap to
trigger the lap counter at the
GPS location where you press
START and at any location
during the ride where you press
LAP .
Select Mark And Lap to trigger
the lap counter at a specific GPS
location marked before the ride
and at any location during the
ride where you press LAP .
5. Customize optional lap data fields
(see page 37 ).
6. Go for a ride.
NOTE: During courses, use the
By
Position option to trigger laps at all of
the lap positions saved in the course.
•
•