GE ZKHCSS2 User Manual

Installation instructions, Zkhcss2, Step 1 remove door and drawer handles

Advertising
background image

Installation
Instructions

ZKHCSS2

Tubular Stainless Steel Handles

and Handle Side Trim

Right hand door swing models are illustrated in these
instructions. Follow these same instructions for left hand
models.

This kit provides for the installation of Tubular Stainless
Steel handles or custom handles on 3/4" overlay custom
panels.

Tools and materials required:
• #2 Phillips screwdriver
• Drill and 7/32", 1/8" bits and 7/8" spade bit
• Custom door panels,
• Safety glasses
• Center punch
• Hammer
• Pencil

Parts List:
A. Freezer tubular handle (95376) and

fresh food tubular handle (95377)

B. 4 Handle standoffs, 70536
C. 6 Screws for handle standoffs
#10-32x1" pan head machine screws (4 required, 2 extra), 36298
D. 6 Set screws (4 required, 2 extra) 70539
E. 3/32” Allen wrench for set screws, 70548
F. 6 Plastic spacers (4 required, 2 extra) 70540
G. 5 Trim screws (4 required, one extra) 8665
H. Handle side trim for LH models (75468), trim for RH models (75469)

Before you begin – Read these instructions completely and carefully.
Note to Installer: Be sure to leave these instructions with the Consumer.
Note to Consumer: Keep these instructions with your Owner’s Manual for future reference.

STEP 1 REMOVE DOOR AND

DRAWER HANDLES

• Open refrigerator door to 90

°

. Remove the 4 screws

holding the handle to the door.

• Remove 4 screws holding handle side trim. Discard all

screws and trim. Discard handle.

• Open freezer drawer to access handle and trim.

Remove and discard handle, retain screws and trim.

If you are installing custom handles, go to STEP 3.

B

C

E

H

F

G

D

A

Advertising