Grandstream Networks GXP14XX - Manual (Page 16)

GRANDSTREAM GXP21XX/GXV3140/GXV3175 SERIES PHONES 20-BD5320-00
© 2011 GRANDSTREAM PAGE 16 OF 45
4.2 Subscriber Level Configuration Parameters
This section identifies the device-specific parameters, including registration and
authentication. These settings must be unique across devices to be matched with the
settings for a BroadWorks subscriber.
Provisioning a subscriber to register with BroadWorks allows calls to terminate to the
subscriber’s line. Registration requires that a unique address of record (AoR) is
provisioned on BroadWorks and the phone; provisioning an AoR on BroadWorks consists
of setting the line/port parameter to a unique value within the Application Server cluster.
Grandstream GXP21xx/GXP14xx/GXV31xx each supports different numbers of SIP
accounts. The following example shows how to configure subscriber elements for an
account.
Step Command Purpose
Subscriber Configuration Items
Step 1 Enable each line to be used.
Account Active = "Yes" ;
Enable a line of
GXP21xx/GXP14xx/GXV31xx in use.
Step 2 Set display name for each
line.
Example:
Account Name = "BroadSoft" ;
For each line, configure the SIP Account
name to be displayed on the phone.
Step 3 Set Register User ID for
each line.
Example:
SIP User_ID = "2405551111" ;
The register user ID must correspond with
the line/port setting on BroadWorks.
Step 4 Enable SIP Authentication
for each line.
Example:
Authenticate ID =
"[email protected]" ;
Authenticate Password =
"welcome" ;
If the Authentication service is configured
on BroadWorks, these parameters must be
configured to match the BroadWorks
settings.
Step 5 Configure caller ID name for
each line.
Example:
Name = “Claire Smith” ;
Configure the caller ID name for each line.
Subscriber BLF Configuration Items (GXP21xx only)
Step 1 Configure eventlist BLF for a
line.
Example:
eventlist BLF URI =
“BLF2405551111”;
Configure eventlist BLF under Account
Settings page.