Epson CX11NF - Manual (Page 35)

Copying
35
Copying
4
This chapter describes how to make basic copies, customize settings for special copy
jobs, and cancel copying, if necessary.
Basic Copying
Follow these steps to make a basic copy:
1. Make sure the product is turned on and paper is loaded. For instructions on
loading paper, see page 7.
2. Place your original on the document table or in the Auto Document Feeder
(CX11NF only). For instructions, see page 14.
3. Press the Copy button on the control panel.
The Copy light turns on. The LCD panel displays Copy Mode for a few seconds,
then changes to the copy mode screen.
4. Specify your copy settings as necessary. For details, see page 36.