Epson CX11NF - Manual (Page 70)

70
Using the Control Panel
Accessing the Setup Menu
You can use the Setup menu to access a variety of submenus so you can customize
settings for copying, faxing, scanning, and printing.
Tip:
In general, you should select all your print settings from the printer driver, since they
override Setup menu settings. Use the Setup menu only to select settings you cannot
make in your software or printer driver.
1. Make sure the CX11N is turned on, then press the Setup button.
The Setup light turns on and the LCD screen displays Setup Mode for a few
seconds, then changes to the Setup menu screen.
2. Use the
u
and
d
buttons to select a submenu, then press the
r
button to view
items in the submenu.
3. Use the
u
and
d
buttons to select submenu items, then press the
r
button to
perform a task, or to view the available settings.