Epson WorkForce 630 - Manual (Page 22)

22 Receiving Faxes
■ If you’ve connected a telephone to the product, dial the number from the
phone. Select
Send , then press the B&W or Color x Start button.
Note:
Don’t hang up the phone until you begin transmitting the fax.
Receiving Faxes
Before receiving faxes, make sure you load plain paper and select the correct
settings for the paper you’ve loaded.
1. Press the Fax button.
2. Press x Menu and select Fax Print Settings .
3. Select Paper Size and make sure the setting matches the size of paper you
loaded.
Note:
If the incoming fax is larger than the paper you loaded, it is reduced to fit or printed
on multiple pages, depending on the Auto Reduction setting you select.
4. Press x Menu when done.
To receive faxes automatically, press the Auto Answer
button to turn on the Auto Answer light.
Note:
To change the number of rings before the product answers,
see page 20.
If you run out of paper during printing, you see an error
message. Load more paper and press the
B&W or Color
x Start button to continue.
To receive faxes manually, turn off the Auto Answer light and follow these steps:
1. When your telephone rings, lift the phone off the hook.
2. Select Receive , then press the B&W or Color x Start button.
3. After all the pages are received, replace the phone on the hook.
4. Press OK to print the fax.
Auto Answer light