GE VG2053/VG4053 - Manual (Page 21)

19
Recording a Program
Checking or Clearing Timer Recordings
1. Press MENU on the remote to display the VCR MAIN
MENU .
2. Press 2 to display the TIMER RECORDINGS menu.
3. Press the number of the program you want to remove.
4. Press 0 on the remote when the program you want to
delete appears on the screen.
5 . Press MENU to remove the menu from the screen when
you finish.
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the VCR’s
AUDIO and VIDEO IN jacks. Recording from the line
input is convenient if you have a satellite receiver or
similar component attached to these jacks.
To timer record from the component connected to the
VCR’s line input, press
INPUT on the remote to enter AV
instead of the channel number on the TV screen during
timer programming.
Recording While You’re Away (Timer Recording)
VCR MAIN MENU
1 SET CLOCK
2 TIMER RECORDINGS
PROGRAM 1 - ONE TIME
CHANNEL AV
START TIME --:--
END TIME --:--
START DATE --/--/--
TAPE SPEED SP
PRESS 56 TO MOVE
PRESS MENU TO EXIT
TIMER RECORDINGS
CH START END DATE
1 02 9:29 11:01 3/ 3
2 -- --:-- --:-- --/--
3 -- --:-- --:-- --/--
4 -- --:-- --:-- --/--
PROGRAM 1 (ONE TIME)
CHANNEL 02
START TIME 9:29 PM
END TIME 11:01PM
START DATE 3/3
TAPE SPEED EP
PRESS 0 TO DELETE
PRESS
5 6 TO MOVE
PRESS MENU TO SAVE