Grundig GUSR91DAB - Manual (Page 8)

7
Changing the DAB Station Information
It is possible to change the information displayed on the second line of the display
when listening to a DAB station. There are seven types of information
available as listed below with examples to the right.
Dynamic Label Segment (DLS) This is scrolling text
information supplied by the DAB station. It may
comprise information on music titles or details of the
programme and is provided by the broadcaster.
Signal Bar Shows the transmission signal level.
Program Type (PTY) This is a description of the
type of programme provided by the DAB station and
is provided by the broadcaster.
Multiplex Name This will show the multiplex that is
broadcasting the programme you are listening to.
Channel and Frequency This displays the channel
number and the transmission frequency.
Signal Error Rate If the transmission signal contains
errors the system can apply correction.
The amount of signal correction can be displayed as a
numerical value between 0 and 99. As the value
increases, you will hear the signal degrade.
To improve reception, try adjusting the position of the
antenna. Please note a signal error rate of 30 or more
will make the station un-listenable.
Signal Information This shows the digital bit-rate
and the signal mode.
Time This shows the current time and is provided by
the broadcaster so will always be accurate.
Date This displays the date and is provided by the
broadcaster.
News
BBC National DAB
11C 220.352MHz
Signal error 1
80kbps Mono
Press DISPLAY Button
BBC Radio 5 Live
DLS scrolling
BBC Radio 5 Live
BBC Radio 5 Live
BBC Radio 5 Live
BBC Radio 5 Live
BBC Radio 5 Live
BBC Radio 5 Live
Press DISPLAY Button
Press DISPLAY Button
Press DISPLAY Button
Press DISPLAY Button
Press DISPLAY Button
Press DISPLAY Button
Press DISPLAY Button
BBC Radio 5 Live
Press DISPLAY Button
BBC Radio 5 Live
Press DISPLAY Button
28/12/2009
12:38:33 AM
03 Daily Use
1
2
3
4
5
6
7
8
9