Garmin 110 - Manual (Page 56)

50 Rino ® 110 Owner’s Manual
U
NIT
O
PERATION
> R
OUTE
P
AGE
To add a Find ‘N Go Menu item to a route:
1. Select an item from the Find ‘N Go Menu and
display its Information Page. If a contact is used
in a route, the route changes as the contact’s
position is updated, or it may be saved as a
Waypoint to serve as a stationary point.
2. Select the page Option Menu and select Add To
Route to display the list of routes.
3. Highlight and select the route desired and then
press the Thumb Stick In. A “Waypoint Added
Successfully” message displays.
Editing a Route
To remove all waypoints:
1. From the Route Page, select the on-screen
Option Menu button and press the Thumb
Stick In to access the Option Menu.
2. Highlight the Remove All option and then press
the Thumb Stick In to remove all waypoints from
the list. When you see the prompt “Do you really
want to remove all waypoints from the route?”,
select Yes.
Route Options
To reverse the route:
1. From the Route Page, select the on-screen page
Option Menu button and press the Thumb
Stick In to access the Option Menu.
2. Highlight the Reverse Route option and then
press the Thumb Stick In to reverse the order of
waypoints in the list. To change the route back to
the original order, repeat this process.