Answering phone calls, Receiving calls, Do not disturb – Grandstream Networks GXP1400 User Manual
Page 13: Phone functions during a phone call, Call waiting/call hold, Mute, Call transfer
Grandstream Networks, Inc. GXP1400/1405 User Manual Page 12 of 36
Firmware version: 1.0.1.83 Last Updated: 08/2011
A
NSWERING
P
HONE
C
ALLS
Receiving Calls
1. Incoming single call: Phone rings with selected ring-tone. The corresponding LINE flashes in red.
Answer call by taking Handset off hook or pressing SPEAKER or HEADSET or by pressing the
corresponding account LINE button.
2. Incoming multiple calls: When another call comes in while having an active call, the phone will
produce a Call Waiting tone (stutter tone). Answer the incoming call by pressing its corresponding
LINE button. The current active call will be put on hold.
Do Not Disturb
Do Not Disturb can be enabled/disabled by pressing the MUTE/DND button on the phone. Or users
could set it from the MENU following the steps below.
1. Press the MENU button and scroll down to “Preference”.
2. Select “Do Not Disturb” by pressing menu button.
3. Use arrow keys to either enable or disable “Do Not Disturb” feature.
4. When enabled, there will be a special ‘Do Not Disturb” icon appearing on the display. This will send
the incoming caller directly to voicemail.
P
HONE
F
UNCTIONS
D
URING A
P
HONE
C
ALL
Call Waiting/Call Hold
1. Hold: Place a call on ‘hold’ by pressing the “HOLD” button.
2. Resume: Resume call by pressing the corresponding blinking LINE.
3. Multiple Calls: Automatically place ACTIVE call on ‘HOLD’ by selecting another available LINE to
place or receive another call. Call Waiting tone (stutter tone) audible when line is in use.
Mute
1. During the call, press the MUTE button to enable/disable muting the microphone.
2. The “Line Status Indicator” will show “LINEx: TALKING” or “LINEx: MUTE” to indicate whether the
microphone is muted.
Call Transfer
GXP1400/1405 supports both Blind and Attended transfer. Also, users could make auto-attended transfer
when this feature is enabled from web GUI.
1. Blind Transfer: Press “TRANSFER” button, then dial the number and press the # button to
complete transfer of active call.