Garmin StreetPilot 2650 - Manual (Page 15)

Introduction

Installing the Remote Control
batteries
• THUMB STICK — Selects menu options, changes settings, and enters data. Also it controls
movement of the map pointer on the Map page. Press in (or down) on the thumb stick to select or
activate a highlighted item or to begin data entry. Move the thumb stick from side to side for moving
around the Map page. Use this feature as an alternative to using your finger on the touchscreen.
Practice using it to increase your accuracy.
• ALPHANUMERIC KEYS — Used when you wish to enter numbers for values such as an address
or waypoint name. These keys can be used in conjunction with the thumb stick. For letters, press
the appropriate number key as many times as necessary to get to the correct letter. The number will
appear after the last letter option has been shown. For example, if you wish to input the letter B,
press the number 2 key twice. If you wish to input the number 2, press the number 2 key four times.
When you have selected the correct letter or number, pause, and the unit will automatically advance
the cursor to the next character. Note that the 1 key only accepts one press and SPACE/0 only
accepts two key presses.
In order for the remote to operate properly, be sure to point the IR (infrared) window on the remote towards
the unobstructed IR window on the left front of the StreetPilot.
Adjusting the Speaker Volume
To adjust the external speaker volume:
1. Press and hold the SPeak/voLuMe key. A speaker volume adjustment page appears.
2. Adjust the speaker volume by moving the slider’s thumb up or down with either your finger (on the touch-
screen) or by pressing the thumb stick up or down once the scroll box appears. The loudest setting is ten;
the softest setting is one. Each press activates the audio number. All the way down turns off the speaker.
(Alternatively, volume can be cycled between three settings by repeatedly pressing the SPeak/voLuMe
key from this screen. The three settings are volume off, user setting, and maximum volume.)
3. When finished, touch the X on the touchscreen or press in once on the thumb stick.
NoTe: The remote control requires
two AAA alkaline batteries. To
install the batteries, press up on
the battery door clip, then pull the
battery door away from the remote.
Install the batteries, observing
the correct polarity (see the inside
compartment). Replace the cover.
speaker volume
slider slider thumb
adjusting the volume