Television operation – Grundig VISION II LXW 68-9620 User Manual

Page 13

Advertising
background image

ENGLISH

13

Zap function

With this function you may store the current channel position and
switch to another one (zap).

1

Use »

1…0

« or »

P+

«, »

P-

-« to select the channel position you

wish to store in the zap memory (e.g channel position 7, PRO7)
then press »Z« to store it.
– On the picture screen appears, for example, »Z 7 PRO7«.

2

Using »

1…0

« or »

P+

«, »

P-

« you now may switch to another

channel position.

3

By pressing »

Z

« you may switch at any time to the stored chan-

nel position (PRO7 in the example) and switch back (zap) to the
last viewed channel.

4

Press »

i

« to end the zap function.

– The on-screen display disappears.

Alphanumeric channel selection

You may select the channel positions directly by entering the chan-
nel name (e.g. ARD). For this, letters are assigned to the numeric
buttons »

2…0

«. Up to four letters can be assigned.

1

Use »

2…0

« to enter the first letter of the channel name (e.g.

»

2

« for the letter A).

– A list of all TV channels beginning with the letters »A«, »B«,

or »C« appears on the picture screen.

– Every entry of a further letter confines the list of channel

names.

2

Use »

P+

«, »

P-

« to select the desired channel in the list then

press »OK« to call it up.

Note:

Three methods are possible for selecting a channel position:

1. Letter entry off: The channels are only selected by entering

digits.

2. Letter entry on: The channels are only selected by entering

alphanumeric characters.

3. Mix: When entering a digit, the TV set switches automatical-

ly to the corresponding channel position and the channel list
for assigning letters is displayed.

The channel selection mode is selected in the »Installation«
menu under the »Special functions« menu item. See also the
notes in the Easy-Dialog system.

TELEVISION OPERATION

___________________

Z 7 PRO7

Advertising
This manual is related to the following products: