Troubleshooting tips, Before you call for service – GE GBVH5140 User Manual

Page 20

Advertising
background image

Before you call for service…

Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.

Consumer Support

Tr

oubleshooting T

ips

Operating Instructions

Safety Instructions

Installation Instructions

Problem

Possible Cause

What To Do

Not spinning or agitating

Drain hose is kinked or

Straighten drain hose and make sure washer is not

improperly connected

sitting on it.

Household drain may

Check household plumbing. You may need to call

be clogged

a plumber.

Drain hose siphoning; drain hose •

Ensure there is an air gap between hose and drain.

pushed too far down the drain

Washer pump filter may

Have your pump filter cleaned.

be clogged

Load is out of balance

Redistribute clothes and run drain & spin or rinse & spin.
Increase load size if washing small load containing heavy

and light items.

Leaking water

Door gasket is damaged

Check to see if gasket is seated and not torn. Objects

left in pockets may cause damage to the washer (nails,
screws, pens, pencils).

Door gasket not damaged

Water may drip from the door when the door is opened.

This is a normal operation.

Check back left of washer

If this area is wet, you have oversudsing condition.

for water

Use less detergent.

Fill hoses or drain hose is

Make sure hose connections are tight at washer and

improperly connected

faucets and make sure end of drain hose is correctly
inserted in and secured to drain facility.

Household drain may

Check household plumbing. You may need to call

be clogged

a plumber.

Not draining

Drain hose is kinked or

Straighten drain hose and make sure washer is not

improperly connected

sitting on it.

Household drain may

Check household plumbing. You may need to call

be clogged

a plumber.

Drain hose siphoning; drain hose •

Ensure there is an air gap between hose and drain.

pushed too far down the drain

Washer pump filter may

Have your pump filter cleaned.

be clogged

Not spinning

Drain hose is kinked or

Straighten drain hose and make sure washer is not

improperly connected

sitting on it.

Household drain may

Check household plumbing. You may need to call

be clogged

a plumber.

Drain hose siphoning; drain hose •

Ensure there is an air gap between hose and drain.

pushed too far down the drain

Washer pump filter may

Have your pump filter cleaned.

be clogged

Load is out of balance

Redistribute clothes and run drain & spin or rinse & spin.
Increase load size if washing small load containing heavy

and light items.

Motor is overheated

Washer motor will stop if it becomes overheated. It will

automatically restart after a cool down period of up to
30 minutes (if washer has not been manually turned off).

Door is open

Make sure door is closed.

20

Advertising
This manual is related to the following products: