Philips Magnavox ZV427MG9 - Manual (Page 10)

10 EN EN
FUNCTIONAL OVERVIEW
1 2* 3
6 5 4 22 21 13 11 10 12 9 8* 7 2019 18 17 15 16 14 23
Front Panel
(*) The unit can also be turned on by pressing these buttons or inserting a cassette tape.
1. Cassette compartment (VCR)
Insert a cassette tape here.
2.
A OPEN/CLOSE button (DVD)*
Press to open or close the disc tray.
3. Disc tray (DVD)
Place a disc when it is open.
4. AUDIO input jacks (L2) (DVD/VCR)
Use to connect external device with an RCA audio
cable.
5. VIDEO input jack (L2) (DVD/VCR)
Use to connect external device with an RCA video
cable.
6. S-VIDEO input jack (L2) (DVD/VCR)
Use to connect the S-video output of external device
with an S-video cable.
7. I RECORD button (DVD)
• Press once to start a recording.
• Press repeatedly to start the one-touch timer
recording.
8. B PLAY button (DVD)*
Press to start or resume playback.
9. C STOP button (DVD)
• Press to stop playback or recording.
• Press to stop the proceeding timer recording in DVD.
10. DVD indicator
Lights up when the DVD output mode is selected.
11. SOURCE button (DVD/VCR)
Press to select the component you wish to operate.
12. VCR indicator
Lights up when the VCR output mode is selected.
13. D.DUBBING button (DVD/VCR)
Press to start VCR to DVD (DVD to VCR) duplication
which you set in the main menu.
14. TRACKING L / K buttons (VCR)
• Press to adjust the tracking during playback or in
slow motion of the cassette tape.
• While playback is in still mode, you can adjust the
picture blurred vertically.
15. Display (DVD/VCR)
Refer to “Front Panel Display” on page 14.
16. Infrared sensor window (DVD/VCR)
Receive signals from your remote control so that you
can control the unit from a distance.
17.
IRECORD button (VCR)
Press once to start a recording. Press repeatedly to
start the one-touch timer recording.
18.
BPLAY button (VCR)
Press to start playback.
19. C ASTOP/EJECT button (VCR)
• Press to remove the cassette tape from the cassette
compartment.
• Press to stop cassette tape playback or recording.
• Press to stop the proceeding timer recording in VCR.
20. DF.FWD button (VCR)
Press to rapidly advance the cassette tape, or view the
picture rapidly in forward during playback (forward
search).
21. EREW button (VCR)
Press to rewind the cassette tape, or to view the
picture rapidly in reverse during playback (rewind
search).
22. y ySTANDBY-ON button (DVD/VCR)
Press to turn on the unit, or to turn the unit to the
standby mode. (To completely shut down the unit,
you must unplug the AC power cord.)
23. POWER-ON indicator (DVD/VCR)
Red LED lights up when power is on.