MITSUBISHI ELECTRIC XD50U - Manual (Page 29)

E-28
Freezing a Moving Picture
This function is used to stop and view a moving picture. Note that the input
image continues to advance even though the picture there is a still picture
condition.
A press of the FREEZE button changes the screen to a still picture. A
further press returns the screen to a moving picture.
General Operation
FREEZE MUTE LAMP MODE
PC PC-CARD
VIDEO S-VIDEO
QUICK ASPECT AUTO
ON OFF STANDBY
Cancelling Video and Audio Temporarily
This function is used to cancel the video and audio at the same time.
A press of the MUTE button will blank the picture and the sound, and
the screen will take on the background color that has been set.
Another press will cause a return to the original conditions.
FREEZE MUTE LAMP MODE
PC PC-CARD
VIDEO S-VIDEO
QUICK ASPECT AUTO
ON OFF STANDBY
Lamp Mode
Use this if the picture is projected on a small screen and the picture
is too bright or when projecting images in dark rooms.
Pressing the LAMP MODE button will set the lamp mode.
Low (STATUS indicator is lit green)
Lamp brightness is set to 80% and the lamp life is extended.
Normal (STATUS indicator is off)
Lamp brightness is set to 100% and the screen is bright.
Note:
Frequent switching this mode can degrade the lamp.
FREEZE MUTE LAMP MODE
PC PC-CARD
VIDEO S-VIDEO
QUICK ASPECT AUTO
ON OFF STANDBY
STATUS STANDBY
STATUS indicator