3 installing tcp/ip for nic if not running lpd, Installing tcp/ip for nic if not running lpd -24 – Minolta PageWorks/Pro 18 User Manual
Page 111
6.2 UNIX Printing
6-24
TCP/IP Configuration
Chapt
er 6
3.
At the prompt, type:
#lpadmin -p <local printername> -s <remote
host name or IP address>!PORT1
Note
4.
At the prompt, type:
#enable <local printername>
#accept <local printername>
6.2.3 Installing TCP/IP for NIC If Not Running
lpd
The CD-ROM provided with the NIC includes install scripts for
various UNIX systems. This section describes how to install TCP/IP
printing to the NIC on any of the following operating systems:
•
DEC ULTRIX 4.3 RISC
•
System V Rel. 4
•
Solaris (Ver. 1.x, 2.x)
•
SCO UNIX
•
OSF1/ALPHA
•
IBM AIX
•
HP/UX
Once the NIC has its IP information loaded, the following steps are
necessary for Host-Side TCP/IP printing:
1.
Load the print server software on your workstation. It is presented
as a tar file on the CD-ROM.
2.
Run the appropriate installation script, if available.
3.
Complete the configuration for your operating system.
• There is no space after the remote host name.
PageWorks.book Page 24 Tuesday, August 4, 1998 11:21 AM