2 status/configuration report, 2 status/configuration report -3 – Minolta PageWorks/Pro 18 User Manual

Page 138

Advertising
background image

7.2 Status/Configuration Report

7-3

Operation and Troubleshooting

Chapter 7

7.2 Status/Configuration Report

The Status/Configuration report is sent as a print job to the printer
when the print server is powered on. For example, the report on the
next page shows the configuration of the print server immediately
before the report is printed. Some printers also allow you to use a
command from the front panel that produce a Status/Configuration
report.

It is strongly recommended that you review this report immediately
after installation and any time the setup has been changed. If the report
does not include a protocol that was configured, check that the
procedure was done properly.

Unit Serial No: 460121

Version: 02.11

Network Address: 00:20:6b:aa:bb:cc

Network Topology:Ethernet

Connector: RJ45

Network Speed:10 Megabits

Novell Network Information

enabled

Print Server Name: MLT_460121

Password Defined: No

Preferred Server Name: SERVER1

Directory Services Tree: DSTREE1

Directory Services Context: DSCONTEXT1

Frame Type: Novell 802.3

Peer-to-Peer Information

enabled

Frame Type: Novell 802.3

Network ID: 3221866504

TCP/IP Network Information

enabled

Frame Type: Ethernet II

Protocol Address:192.9.200.200

Subnet Mask: 255.255.255.0

Default Gateway: 192.9.200.254

PageWorks.book Page 3 Tuesday, August 4, 1998 11:21 AM

Advertising
This manual is related to the following products: