2 changing print queues, 3 how to set up notify, Changing print queues -25 – Minolta PageWorks/Pro 18 User Manual
Page 76: How to set up notify -25
4.5 Using the Novell PCONSOLE Utility
4-25
NetWare Conf
iguration
Chapter 4
4.5.2 Changing Print Queues
When you print a file, your system sends the file to a print queue. The
print server assigned to that queue extracts the print job and sends it to
the assigned printer. If a print server is servicing queues on multiple
file servers, you must assign queues to the printer on each file server.
To change the print queues, use the following procedure:
1.
Start the PCONSOLE utility.
2.
Select
Print Server Information
from the
Available Options
menu.
3.
Select the print server from the list.
4.
Select
Print Server Configuration
from the menu.
5.
Select
Queues Serviced by Printer
from the menu.
6.
Select a printer from the
Defined Printers
list.
7.
Press
at the
File Server/Queue/Priority
screen. The
Avail-
able Queues
list appears.
8.
Select a queue from the list.
9.
Press
at the
Priority
screen to leave the priority setting at 1.
The highest priority is 1; 10 is the last. To change the priority of a
queue, press
at the
File Server/Queue/Priority
screen to dis-
play the
Priority
setting screen. Press
to delete the current set-
ting. Type a new number from 1 to 10 and press
.
Repeat steps 7, 8, and 9 to assign additional queues to the printer.
10. Press
and save all changes.
4.5.3 How to Set Up Notify
You can specify users or groups of users that are notified if a problem
occurs when a print job is sent to the printer. If the print server is
servicing queues on multiple file servers, you must set up a NOTIFY
list for each file server. To set up NOTIFY, use the following
procedure:
1.
Start the PCONSOLE utility.
2.
Select
Print Server Information
from the
Available Options
menu.
3.
Select the print server from the menu.
4.
Select
Print Server Configuration
from the menu.
Insert
Enter
Enter
Enter
Esc
PageWorks.book Page 25 Tuesday, August 4, 1998 11:21 AM