Philips Magnavox Blu-ray Disc Player NB500MG1F - Manual (Page 18)

18 EN
PLAYBACK
For the playback media to be read by this unit, the correct media mode should be selected. You can switch the media
mode by following the steps below. “Media Select” is available only when an SD Memory Card is inserted.
Even if you turn the unit to the standby mode in “SD Card”
mode, it will be in “Disc” mode the next time you turn it on.
Selecting the Media Mode “Media
Select” is
available
only when
an SD
Memory
Card is
1 In stop mode, press [SETUP].
2
Use [K / L] to select , then press
[OK] .
3 Use [K / L] to select “Media Select”.
4 Press [OK] repeatedly to select the
desired media.
5 Press [SETUP] to exit.
• Selected media mode is now activated.
Quick
Media Select
HDMI Audio Out
HDMI Video Resolution
Component Output
Player Menu
Disc
HDMI Multi(Normal)
Auto
480i
English
Quick
Media Select
HDMI Audio Out
HDMI Video Resolution
Component Output
Player Menu
Disc
HDMI Multi(Normal)
Auto
480i
English
E5P00UD_01UD_EN.book Page 18 Friday, September 11, 2009 10:03 AM