Philips Magnavox Blu-ray Disc Player NB500MG1F - Manual (Page 23)

23 EN
PLAYBACK
You can play back the disc/card in your desired order.
1 In stop mode, press [MODE].
2 Use [K / L] to select a track / file, then press
[OK].
• For JPEG files, use [K / L] to select a folder, then press
[OK] first, and then use [K / L] to select a file, then
press [OK].
• Press [CLEAR] to erase the last file of the program.
• Use [K / L] to select “All Clear” at the bottom of the
list to erase all the tracks / files in the program.
• The programmed tracks / files is displayed in the right
hand screen.
• Use [s / B] to go back / forward between the
hierarchy of folders.
3 Press [B (play)] to start program playback.
• The program playback will start.
To exit from the program playback mode:
• Press [RETURN] in stop mode.
Program Playback
audio CD
JPEG :
: Track information
File information
audio CD
JPEG :
: “CD-DA” will be displayed.
Current Disc, SD Memory Card,
or folder name will be displayed.
Track / File list : Track / File list in the original
order.
Programmed list : Track / File list in the
programmed order.
Cumulative playback time of all tracks / files in the
programmed list.
Playback status
Current page / Total page number
Operation Guide: Press [RED] to go to the previous
page in the track / file list.
Press [GREEN] to go to the next
page in the track / file list.
Press [BLUE] to go to the
previous page in the
programmed list.
Press [YELLOW] to go to the next
page in the programmed list.
0 : 26 : 24
CD_DA
0:36
1:14
0:45
0:50
0:53
0:20
0:54
8
9
10
11
12
13
14
 
1:14
0:50
1:14
0:50
0:53
0:54
0:36 2
4
9
11
12
14
8
- - / 16
1 6 2 3 4
7
5
8
Program Total
Page Prev Page Next Page Down Page Up
e.g.) audio CD
1
2
3
4
5
6
7
8
Note
• During program playback, press [C (stop)] once to
set the resume point, and then press [B (play)] to
resume program playback from where [C (stop)]
was pressed (audio CD) or from beginning of the file
where [C (stop)] was pressed (JPEG).
• During program playback, press [C (stop)] twice to
display the program screen. To go back to the
normal program playback, press [RETURN] to exit
from the program screen, then press [B (play)].
• Up to 99 tracks / files can be entered.
• To repeat the current track / file in the program,
press [REPEAT] repeatedly until “ Track”
appears during playback. To repeat the entire
program, press [REPEAT] repeatedly until “
All”
appears during playback.
• Playback from a desired track / file and random
playback are not available during program playback.
• Press [MODE] to switch to the random playback mode.
• The program will be cleared when;
- the unit is turned into the standby mode.
- the media mode is switched to the other mode.
- the disc / card is removed. (as for “Disc” mode, just
opening the disc tray will clear the program info.)
0 : 26 : 24
CD_DA

2 / 16 0 : 01 : 05
1:14
0:50
1:14
0:50
0:53
0:54
0:36
2
4
9
11
12
14
8
Program Total
Page Down
Before
you
begin
I
NT
R
O
D
U
CT
IO
N
C
ON
NE
CTIONS
PLAY
BAC
K
F
UNC
T
IO
N
S
ETU
P
O
TH
E
R
S
E5P00UD_01UD_EN.book Page 23 Friday, September 11, 2009 10:03 AM