Motorola Broadband House Amplifier BHA-100K/P-R - Manual (Page 16)

Section 3
Configuration and Installation
This section provides information to configure and install the BHA-100*, including instructions
to:
„
Mount the BHA-100*
„
Configure the BHA-100* (add accessories)
„
Connect and supply power to the BHA-100*
„
Adjust the output level and slope
„
Install the return amplifier kit
Mounting the BHA-100*
The BHA-100* should be mounted on a flat surface and be positioned vertically. This position
results in maximum air flow and the lowest operating temperature. When mounting the
BHA-100*, choose a location protected from the weather, with available power in close
proximity. The BHA-100* should be mounted flush with the wall using appropriate mounting
hardware (not provided with the unit).
Configuring the BHA-100*
To put the BHA-100* into service, the following areas require attention:
„
Power connections
„
Cable equalizer and input pad selection and installation
„
Return amplifier installation
BHA-100* Broadband House Amplifier Installation Manual