Muratec M F X - 5 5 5 5 - Manual (Page 47)

46 _Copying
1. Place the originals face up in the DADF. Or place a single original face
down on the scanner glass. (See "Loading originals" on page 31.)
2. Press Copy from the Main screen.
3. Press the Image tab > Margin Shift
4. Select Margin Shift option.
• Off: Disables this feature.
• Auto Center: Adjusts centers of the paper copy automatically. The
original must be loaded on the scanner glass to use this feature. This
option supports only the original is loaded on the scanner glass.
• Custom Margin: Adjusts the margin of the left and right, top and
bottom as you want using arrows. This option supports both on the
scanner glass or in DADF.
5. Press OK.
6. Press Start on the control panel to begin copying.
Watermark copying
You can copy the original with a watermark. For example, you can use it
when you want to have large gray letters such as Top Secret or
Confidential printed diagonally across the first page or all pages of the
copy.
1. Place the originals face up in the DADF. Or place a single original face
down on the scanner glass. (See "Loading originals and print media" on
page 31.)
2. Press Copy from the Main screen.
3. Select the tray in Paper Supply.
4. Press the Advanced tab > WaterMark.
5. Select WaterMark option.
• Off: Disables this feature.
• Top Secret: Prints the original with Top Secret text.
• Confidential: Prints the original with Confidential text.
• Urgent: Prints the original with Urgent text.
• Draft: Prints the original with Draft text.
• Custom: The machine prints the original with the customized
text.
6. Select 1st Page only, Size, Position, Darkness of options.
7. Press OK.
8. Press Start on the control panel to begin copying.
Overlay copying
If you scan and store the data such as format, you can copy the
original with the previously stored data.
1. Place the originals face up in the DADF. Or place a single original face
down on the scanner glass. (See "Loading originals and print media" on
page 31.)
2. Press Copy from the Main screen.
3. Select the tray in Paper Supply.
4. Press the Advanced tab > Overlay.
5. Press List.
6. Select a file name.
7. Select a overlay option.
• New: Makes the new overlay. When the file name pops up, enter the
file name.
• Detail: Shows information of the selected overlay.
• Edit: Modifies the name of the selected overlay.
• Delete: Deletes the selected overlay.
• Apply: Prints the originals with the selected overlay.
• Print: Prints the selected overlay.
• Cancel: Cancels overlay options you have selected.
8. Press Start on the control panel to begin copying.
If you have selected option New in step 7, the machine starts storing the
new overlay by pressing the Start button.
Auto crop copying
The machine prints only the image of an original after cropping the blank
parts like the margin.
1. Place the originals face up in the DADF. Or place a single original face
down on the scanner glass. (See "Loading originals and print media" on
page 31.)
2. Press Copy from the Main screen.
3. Select the tray in Paper Supply.
4. Press the Advanced tab > Auto Crop.
5. Press On to activate this feature.
6. Press OK.
7. Press Start on the control panel to begin copying.
Multi-Bin
You can choose the output mode for printouts.
1. Press Copy from the Main screen.
2. Press the Advanced tab > Multi-Bin.
3. Select the appropriate option.
• Mailbox: Printouts are stacked in the bin you have set. If you set the
mailbox to Bin3, printouts will be stacked in Bin3.
• Job Separator: Printouts are stacked in the sequence of job order in
each bin. However, if there is a vacant bin left, the vacant bin has
priority, which means prinouts will be stacked there first.
• Collator: Printouts are stacked in sets to match the sequence of
originals in each bin.
• Stacker: Printouts are stacked in bins one-by-one. When Bin1 is full,
printouts will be stacked in Bin2.
4. Press OK.
You can only use this feature if you have installed optional 2-Bin
Finisher or 4-Bin Mailbox.