Mintek HD-61Z575 - Manual (Page 57)

Button Functions
57
Turns the TV on or off.
Press the P OWER button
Note: After turning on the power, you can not turn the power off for about one minute.
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
0 (Zero)
1 (One)
2 (Two)
Power
Number Buttons - 10Key Pad
Tune
Selects the signal input source for the television: INPUT-1, 2, 3 or 4 for video devices like
VCR’s DVD players, or camcorders.
Press the I NPUT button
Notes:
• When you return to TV mode, press the R ETURN +/TV button or direct 10 key pad.
• You can also access the FRONT PANEL CONTROL screen by using the M ENU button on
the side of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose
INPUT by pressing M
ENU † on the side panel and choose a mode by using the C HANNEL +/-
buttons ( √ OPERATE ® ).
Input
Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the T
UNE button. For example, to move to channel 12:
1 (One)
2 (Two)
Press the T UNE button
Digital-In
Use this button to directly select the digital-in input.
Press the D IGITAL -I N button
• Digital-In on the menu will display only when the 480p picture signal in Digital-In is displayed.
HD-ILA Eng 57 5/6/04, 9:51:20 AM