Mercedes-Benz Comand 6515 6786 13 - Manual (Page 163)

163
Navigation
During route guidance
Deleting the active via route
̈ Press g to select option Delete
Active Via .
̈ Press E.
The system deletes the via route and
recalculates the route to the
destination.
Changing the active via route
̈ Press g to select option Change
Active Via .
̈ Press E.
The list for selecting another via route
appears.
̈ Use G or g to select the desired via
route.
̈ Press E.
The system recalculates the route.
The detour function blocks a route section
ahead. If possible, the system will
calculate a detour. You can adjust the
length of the route section to be blocked.
Switching on
̈ Activate the soft key display ( ୴ page 160).
̈ Press the Detour soft key.
i
If you enter a new destination, the sys-
tem will automatically delete any active
via route.
Selecting a detour
i
If the system does not allow you to
block a route section, the message
No
Detour Possible is displayed.
Traffic jams are identified by the driver,
not by the COMAND. The detour
function may also be possible if the
vehicle is traveling on a road that does
not appear on the DVD.
i
If you have already placed a block on a
route section,
Detour appears written
in black. A menu will appear instead of
the map (
୴ page 164).