Mercedes-Benz Comand 6515 6786 13 - Manual (Page 86)

86
Audio
DVD operation
Changing the camera view
̈ During playback of the DVD, activate
the DVD settings menu (
୴ page 83)
̈ Press the Angle soft key.
A list of the available camera views will
appear.
̈ Use g or G to select the desired
camera view.
̈ Press E.
The selected camera view is used.
̈ Display the soft keys ( ୴ page 79).
̈ Press the Brightn. , Contr. or
Color soft key.
̈ Press h or H.
The respective setting is changed.
If several movies are on the DVD, you can
select a movie directly.
Movies can be selected while the DVD is
played back or stopped.
E.g.: Select movie no. 3
̈ Press 3.
The 3rd movie starts after a short
while.
i
You can only change the camera view if
several camera views are stored on the
DVD. The number of available
camera views depends on the DVD.
i
The Angle soft key cannot be selected
if the Settings menu is activated from
within the DVD menu (
୴ page 82).
In this case, select the camera view in
the DVD menu.
Some DVDs supporting different
camera views don’t offer a switch
option. In this case, select the camera
view in the Settings menu.
Adjusting brightness, contrast and
color
i
In order to avoid driver distraction, the
video function is disabled and no
images will be shown on the COMAND
screen. Therefore the following soft
keys will have no visible effect.
Selecting a movie
i
Movie selection may also be possible in
the DVD menu saved on the DVD
(
୴ page 82).