Motorola SURFboard SVG2501U - Manual (Page 27)

B
Configuring the Gateway • Changing the Default Username and Password
SVG2501 Series Wireless Voice Gateway • User Guide 18
550885-001-a
Menu Options Function
Battery Provides the current status information about the backup battery, if
installed.
Logout Closes the SVG2501 Configuration Manager.
Changing the Default Username and Password
From the Status menu, select Security. Complete each field and then click Apply to
save your changes.
• All entries are case-sensitive.
• For Password Change Username, type a new username.
• For Current Username Password, type the old password.
• Make sure No is selected for Restore Factory Defaults.
Note: Do not run Restore Factory Defaults to change the Username Password.
Restoring the Default Username and Password
1. From the Status menu, select Security.
2. Select Yes under Restore Factory Defaults.
3. Click Apply to reset the default username and password.
4. Log in again using the defaults.
WARNING: If you run Restore Factory Defaults, you will lose additional custom
configuration settings including your Parental Controls, Firewall, and Advanced settings.