Scan tuning, Station memory, Storing stations – Mercedes-Benz 2002 E 55 AMG User Manual

Page 145: Retrieving a station from memory, Direct frequency input (am and fm only)

Advertising
background image

142

Audio system

Technical

data

Instruments
and controls

Operation

Driving

Instrument

cluster display

Practical hints

Car care

Index

Scan tuning

Press the SC key. Each strong
receivable station on the band
selected will be tuned in for
8 seconds. The first scan will
tune only the stations with a

high signal strength. The second scan will tune every
receivable station. By pressing either the

,

,

or

buttons, or the “SC” key the scan mode

can be cancelled.

Station memory

Ten stations can be stored in
the AM and FM bands via the
alpha-numeric keypad. The
“0” button corresponds to
location 10. Weatherband

(WB) channels 1 to 7 can be retrieved via the alpha-
numeric keypad and are preset at the factory.

Storing stations

Hold the number button down for approximately
2 seconds. The currently displayed frequency is stored
on the selected station button. The storage procedure is
confirmed by a short signal tone.

Retrieving a station from memory

Press the desired station button.

Direct frequency input (AM and FM only)

Select the band. Press the
“ button and enter the
desired frequency using the
alpha-numeric keypad.
Frequencies outside of the

frequency ranges (frequencies specified on page 141)
will not be accepted. The frequency input mode is
cancelled if no button is pressed within 4 seconds.

W210.book Seite 142 Mittwoch, 30. Mai 2001 11:45 11

Advertising
This manual is related to the following products: