MITSUBISHI ELECTRIC TG-2000A - Manual (Page 23)

20
7.1 Before Startup
Please confirm the following items before starting the TG-2000A application.
(1) A test run of the air conditioning system has been completed.
(2) Check that the personal computer, hub, G-50A, power supply unit, and air conditioner power are
turned on.
(3) All PC hardware and cables have been connected and the proper software installed.
(4) “Date and time” setting are correct.
7.2 Startup
Start the integrated centralized control software TG-2000A
application.
Follow these steps to startup the TG -2000A application.
[Procedure]
1) Restart Windows
When Windows OS restarts, the user automatically logs on
and the TG-2000A program starts. When the startup process
begins, the setup screen is displayed.
* When Windows OS restarts, the integrated software
TG-2000A application starts automatically.
After the startup screen is displayed, the behavior of the
application depends on the existence of System Settings
data.
Case 1: Without System Settings data: (the first startup)
The initial screen is displayed. Start with Chapter 8
“Changing System Settings”
Case 2: With system setting data
After the system has been set up once, turning on the
power brings up the Management window, and the startup
process begins immediately.
The startup process takes some time (approx. 10 to 20 minutes).
To change the initial settings, go to the initial window.
See the procedure in chapter 6.3 “Accessing functions
and moving between windows”.
7. Initial Startup and Shutdown
Maintenance Tip
• For safety reasons, make a thorough check of
all equipment and connections.
Desktop screen
Startup screen
Initial window