MITSUBISHI ELECTRIC TG-2000A - Manual (Page 51)

48
8.9.8 Currency unit set (Step 7)
Follow these steps to set the currency. Currencies that do not appear in the display can be entered
manually.
Selecting a Currency from the Display
[ Procedure]
1) Click the Currency option button.
Click the option button of the currency to be used.
Manually Setting the Currency
[Procedure]
1) C l i c k “E t c . ” option button.
To display a currency that does not exist in the
currency display, click the “Etc.” option button.
2) Enter the currency unit.
Enter the currency unit and the number of decimal
places to use.
* The number of decimal: 0~4
Exit the Currency Settings.
[Procedure]
1) Click [OK] button.
To exit the Currency Settings, click the [ OK] button.
* If the [Cancel] button is clicked, the settings are interrupted and the screen returns to the initial
window.
8.9.9 Charge set (Step 8)
Follow these steps to set the rate schedule for electric power fees. Select within/outside, weekend,
and seasonal rates for this rate system.
Set the electric power rate schedule.
[Procedure]
1) Select the rate schedule to be used.
Click the option button of the rate schedule to be
used.
2) Select the unit rate and applicable time period or
day of the week .
Set the unit rate, applicable time, month/day, or
day of the week for the rate schedule. Inputting
from the keyboard is also possible.
3) Click [OK] button.
When finished setting the rate schedule, click
the [ OK] button.
* If the [Cancel] button is clicked, the settings
are interrupted and the screen returns to the initial window.
Note:
• If a required item is left blank (including 0 value), a warning message appears. Correct this item to
proceed.
• Charge setting can also be performed at the Management window.
• Within a time (daytime) spanning one day cannot be set. Within a time (daytime) can be set once a
day.
• It is possible even for proportionally divided power charges (manual input of electric amount) (*) to
make the settlement for the “Charge ratio” of the air-conditioning charge using the charge unit cost
calculated on this screen. Be sure to execute the charge setting.
* Without watt hour meter connection proportionally divided power charge function
Currency Unit window
Rate Settings window