Makita MAC5200 - Manual

OWNERS MANUAL FOR
Oil Lubricated Air Compressor
MODEL No
MAC5200
SPECIFICATION CHART
Model # MAC5200
Horsepower 3
SCFM @ 40 PSIG 6.9
SCFM @ 90 PSIG 6.5
Cut-In Pressure 110 PSI
Cut-Out Pressure 140 PSI
Bore 47 mm
Stroke 44 mm
Voltage -Single Phase 120
Motor RPM 3420
Amperage @ max pressure 13.8
Tank Size 5.2 Gallon
CSA/US Listed Yes
Minimum Circuit Requirement: 15 AMPS
*A circuit breaker is preferred. Use only a fuse or circuit
breaker that is the same rating as the branch circuit the air
compressor is operated on. If the air compressor is connected
to a circuit protected by fuses, use time delay fuses.
IMPORTANT — Read the Safety Guidelines and ALL
instructions carefully before operating.
www.makitatools.com