Gathering the ip addresses, Gathering the ip addresses -2 – McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 User Manual

Page 108

Advertising
background image

6

6-2

McDATA UltraNet Edge 3000 User Guide

Configuring a 2x2 Ethernet Wide Area Network

6. Adding an IP Circuit

7. Creating Data Paths for Fibre Channel Switch Interfaces

8. Delivering the Configured Network

NOTE:

For help on the configuration process, click the Help button on the

active dialog box or press the F1 key.

Gathering the IP
Addresses

Before starting the configuration procedure in ConfigManager you
will need to gather the IP addresses for your network. The IP host
addresses and the completed UltraNet Edge Storage Router
Configuration IP Address Worksheet
from Appendix J will be used as
examples in the configuration process. .

Figure 6-1 shows an example of a network configured with two
UltraNet Edge 3000s as a 2x2 implementation.

Figure 6-1

Sample F_port Ethernet WAN with two UltraNet Edge 3000s

Using the Configuration IP Address Worksheet from Appendix J, gather
the IP addresses and associated subnet masks to configure each
UltraNet Edge 3000. .

Default

Gateway 1

Router/

Switch

192.168.10.3

192.168.10.1

192.168.100.1

192.168.100.4

192.168.20.3

192.168.20.1

192.168.200.1

192.168.200.4

IP Cloud

UltraNet Edge
Storage Router
Node 10

UltraNet Edge
Storage Router
Node 20

Default

Gateway 2

Router/

Switch

Sb0

8

6

Maintenance IP

Ethernet WAN

Ethernet WAN

Maintenance IP

Router/

Switch

192.168.101.4

192.168.201.4

IP Cloud

Router/

Switch

Advertising