Adding an ip circuit, Adding an ip circuit -12 – McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 User Manual

Page 118

Advertising
background image

6

6-12

McDATA UltraNet Edge 3000 User Guide

Configuring a 2x2 Ethernet Wide Area Network

4. Click the Finish button to complete the configuration.

5. Right-click on Node 20 and then repeat step 1 through step 4 to

set the licensing information for this node.

6. Continue the configuration process by proceeding to the “Adding

an IP Circuit” procedure.

Adding an IP Circuit

You will now create an IP circuit. A circuit is the IP WAN link
between Node10 and Node20. Use the IP Circuit Wizard to create
and configure the IP circuit by using the following procedure:

1. Select the Links tab on the center toolbar.

Advertising