McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 141)

7
Configuring an E_Port Extension over an ATM WAN 7-3
Configuring a 1x1 ATM Wide Area Network
• ATM IP Management addresses - (Optional, if this address is left
blank during configuration, UCM will automatically assign valid
addresses.)
Starting UltraNet
ConfigManager This section explains how to start the UltraNet ConfigManager
(UCM) software and provides information about the UltraNet
ConfigManager Online Tutorial.
You will have the option to use the Online Tutorial when you first
open the UltraNet ConfigManager software. You can use either the
Online Tutorial or this chapter of the UltraNet Edge Storage Router User
Guide to create a sample network of a 1x1 ATM WAN.
Start the UltraNet ConfigManager application from either the icon
on your desktop or the Start menu.
Figure 7-2 UltraNet ConfigManager Main Window
Adding Nodes for
an ATM WAN
Configuration Use the following procedures to create a sample network map for a
1x1 ATM OC-3 WAN configuration. This configuration will have two
nodes that extend one Fibre Channel interface over one ATM OC-3
WAN.
Tree
View
Area
Network
Map
Area