McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 162)

7
7-24 McDATA UltraNet Edge 3000 User Guide
Configuring a 1x1 ATM Wide Area Network
21. Continue the configuration process by following the “Creating a
Data Path” section in this chapter.
Creating a Data
Path After configuring the ATM circuit, you need to establish a
connection between the FC/IP interfaces by creating a data path.
This procedure will complete the configuration process.
Once you have configured the IP circuit, your screen should look
like the following example:
1. In the main window of the map, right-click on the FC/IP interface
(the cloud icon for Node10) in the network map.
The Create Data Path menu is displayed.
Right-click
on the cloud
Double-click
on the cloud