McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 250)

9
9-42 McDATA UltraNet Edge 3000 User Guide
Delivering the Configured Network
16. Repeat step a for each LUN that needs the source WWN filtering
applied.
17. Click OK.
18. Proceed to the “Delivering the Configured Network” section.
Delivering the Configured Network
Now that you have configured a sample network, or if you made
changes to the configuration parameters, you must deliver the
configuration information for each node defined on the active
network map to the actual nodes.
The configuration information can be delivered in two different
ways, File>Deliver Network or File>Delivery Wizard.
The configurations can be delivered via the Maintenance Port IP or
the PPP Port IP. If you do not have direct IP connectivity, use the PPP
option. See “Setting the Delivery Properties” below.