Fan assembly removal procedure, Fan assembly removal procedure -3, Fan assembly – McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 User Manual

Page 281

Advertising
background image

12

Hardware Maintenance

12-3

Fan Assembly Removal Procedure

Compression Card

Flash Disk

A chassis replacement requires the cover and all interface cards be
removed and installed into the new chassis.

Fan Assembly Removal Procedure

Use the following procedure to remove the fan assembly from the
UltraNet Edge 3000.

Tools Required:

A small straight-slot screwdriver.

CAUTION

Attach a wrist strap and follow ESD procedures during the
handling of all electronic components.

1. Remove the unit from the equipment rack if necessary.

NOTE:

It is not necessary to power down the unit to perform this removal

procedure.

CAUTION

If you don’t power down the unit, remember the fan blades will
still rotate until you disconnect their power feed wires.

10/100, GIGE, OC-3

I/O 4

Sb1

10

Fibre Channel,

1 Gigabit or 2 Gigabit

I/O 2

Fibre Channel,

1 Gigabit or 2 Gigabit

I/O 1

10/100, GIGE, OC-3

I/O 3

Advertising