McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 300)

12
12-22 McDATA UltraNet Edge 3000 User Guide
Replacing the Gigabit Ethernet Long Wave Transceiver
Installing the Gig-E
Long Wave SFP
Transceiver The long wave transceiver for the Gig-E interface card has a blue
metal clasp, shown below. Use the following procedure to install the
transceiver into the interface card.
Installing the Blue
Metal Clasp
Transceiver
1. Carefully position the long wave transceiver to insert it into the
interface card.
2. Slide the transceiver into the interface card until it clicks into
place.
Sb0
5
4
Metal Clasp
Sb0
5 3