Cables, connectors, and adapters, Rs-232 cables with rj-45 connector, Db adapters – McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 User Manual
Page 363: Appendix c, Appendix c, cables, connectors, and, Adapters, Appendix c, cables, Connectors, and adapters
Advertising
C-1
C
Cables, Connectors, and
Adapters
This appendix lists the RS-232 cables, the DB adapters, and the
pinouts for the DB adapters available through McDATA. It also
contains cable and connector specifications for the Fibre Channel,
10/100 Ethernet, Gigabit Ethernet, and OC-3 ATM interfaces.
RS-232 Cables with RJ-45 Connector
The RS-232 cable with RJ-45 connector is used to connect the UltraNet
Edge 3000 to a serial interface. Refer to Table C-1 for the lengths of the
RS-232 cable.
DB Adapters
This section lists the Data Bus (DB) adapters available through
McDATA. If you need to build your own DB adapter, this section also
lists the pinouts for the DB adapters.
Table C-1
RS-232 Straight Through Cable with RJ-45 Connector Ends
Cable Length
10 feet
Advertising