McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 382)

D-10 UltraNet™ Edge Storage Router 3000 User Guide
F_Port Disk Streaming Settings
The Fibre Channel Interface screen appears.
2. Select the Advanced tab.
3. Enable or disable Disk Streaming:
— To disable E_port Disk Streaming, clear the Enable Disk
Streaming check box and click OK.
— To enable E_port Disk Streaming, select the Enable Disk
Streaming check box and click OK.
For information about enabling Disk Streaming, see “Enable Disk
Streaming” in this chapter.
F_Port Disk Streaming Settings
The F_port Disk Streaming function is disabled by default. Once your
network has been configured, you can verify the settings for F_port
Disk Streaming on the Advanced Tab of the FC Switch screen in the
Fiber Channel Switch Interface dialog.
Enable/Disable
F_Port Disk
Streaming Use the following procedure to verify and change your F_port Disk
Streaming setting once your network has been configured:
1. Double-click the Fibre Channel Switch interface in the
Network Map.
The Fibre Channel Switch Interface dialog appears.