Maxim Integrated MAX1402 - Manual

General Description
The MAX1402 evaluation system (EV system) is a com-
plete, multichannel data-acquisition system consisting of
a MAX1402 evaluation kit (EV kit), Maxim 68HC16 micro-
controller (µC) module, and USBT0232. The MAX1402 is
a low-power, multichannel, serial-output analog to digital
converter (ADC). Windows
® 98/2000/XP-compatible soft-
ware provides a handy user interface to exercise the
MAX1402’s features. Source code in C++ and 68HC11
assembly language is provided for the low-level portion of
the software.
Order the EV system for comprehensive evaluation of
the MAX1402 using a personal computer. Order only
the EV kit if the 68HC16 µC module has already been
purchased with a previous Maxim EV system, or for
custom use in other µC-based systems.
The MAX1402 EV kit and EV system can also be used
to evaluate the MAX1400. Simply order a free sample of
the MAX1400CAI along with the MAX1402 EV kit.
MAX1402 Stand-Alone EV Kit
The MAX1402 EV kit provides a proven printed-circuit
board (PCB) layout to facilitate evaluation of the
MAX1402 with user-supplied software and hardware. It
must be interfaced to appropriate timing signals for
proper operation. Refer to the MAX1402 IC data sheet
for timing requirements. See Table 2, Jumper Functions.
MAX1402 EV System
The MAX1402 EV system operates from a user-supplied
+8V to +12VDC power supply.
Features
♦ Easy to Configure
♦ Collects Up to 8192 Samples at Full Speed
♦ Complete Evaluation System
♦ Proven PCB Layout
♦ Fully Assembled and Tested
♦ EV Kit Software Supports Windows 98/2000/XP
with RS-232/COM Port
♦ EV Kit Software Supports Windows 2000/XP with
USB Port
Evaluate: MAX1400/MAX1402
MAX1402 Evaluation Kit/Evaluation System
________________________________________________________________ Maxim Integrated Products 1
19-1440; Rev 2; 5/07
Component Lists
MAX1402 EV System
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
Ordering Information
MAX1402 EV Kit
Windows is a registered trademark of Microsoft Corp.
Note: The MAX1402 software can only be used with the com-
plete evaluation system (MAX1402EVC16), which includes the
68HC16MODULE-DIP, USBTO232, and the MAX1402EVKIT.
PART TYPE RANGE INTERFACE TYPE
MAX1402EVKIT 0°C to +70°C User supplied
MAX1402EVC16 0°C to +70°C Windows software
PART QTY DESCRIPTION
C3–C8 6
100pF ceramic capacitors (1206)
TDK C3216C0G2J101K
C9, C10, C11 3
0.1µF ceramic capacitors (1206)
Murata GRM319R71H104K
TDK C3216X7R1H104K
C12, C13 2 Not installed, capacitors
C15 1
2.2µF, 25V X7R ceramic capacitor
TDK C3216X7R1E225K
J1 1 2 x 20 right-angle socket
J2 1 Female SMA connector
JU1–JU8 0 Not installed
R1–R6 6 100 Ω ±5% resistors (1206)
R7, R8 2 10 Ω ±5% resistors (1206)
R9, R10 2 Not installed, resistors
U1 1 MAX1402CAI (28-pin SSOP)
U2 1
MAX6025AEUR (SOT23)
2.500V voltage reference
(200ppm/°C max)
Y1 1
2.4576MHz ceramic resonator
Murata CSTCC2M45G53-R0
— 1 PCB: MAX1402 Evaluation Kit+
PART QTY DESCRIPTION
MAX1402EVKIT 1 MAX1402 EV kit
68HC16MODULE-DIP 1 68HC16 µC module
USBTO232+ 1
USB-to-COM port adapter
board
+Denotes lead-free and RoHS-compliant.