Miele G 7856 - Manual (Page 49)

,
All electrical work must be
carried out by a suitably qualified
person in compliance with local and
national safety regulations.
A damaged power cord must only
be replaced with a genuine Miele
cord by a Miele Service Technician.
^ For technical data see the data plate
or wiring diagram supplied.
The machine must only be operated
with the voltage, frequency and fusing
shown on the data plate.
The data plate is located on the rear of
the machine and behind the service
panel on the upper left side.
The dishwasher can be converted
according to the supplied converting
diagram and wiring diagram.
The wiring diagram is located behind
the operating panel.
The conversion diagram is located
behind the service panel.
^ See also the supplied installation
diagram.
WARNING
THIS APPLIANCE MUST BE
GROUNDED
Grounding the machine
A connection screw with the grounding
symbol (
8
) is provided on the back of
the machine for grounding.
PLEASE NOTE:
The G 7856 is available as two
separate versions:
a 240V version,
a 208V version.
To avoid machine damage, please
ensure proper outlet voltage prior to
installation.
Electrical connection
49