Miele G 5810 - Manual (Page 48)

,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Problem Possible fault Solution
After the dishwasher
was turned on with
the
K button, the
display stays off and
the "Start / Stop"
indicator does not
flash.
The machine is not
plugged in. Insert the plug.
The circuit breaker has
tripped. Reset the circuit breaker.
See the data plate for
minimum amperage.
The dishwasher stops
during a program. The circuit breaker has
tripped. – Reset the circuit breaker.
See the data plate for
minimum amperage.
– If the circuit breaker trips
again. Contact Miele.
One of the following faults appears on the
display: Before fixing the fault:
– Press the
K button to turn
the dishwasher off.
; Fault FXX There may be a technical
fault. After a few seconds:
– Turn the dishwasher on.
– Select the desired
program.
– Press the Start / Stop
button.
If the fault is indicated again,
a technical fault has
occurred.
– Contact Miele.
L Waterproof The waterproof system
has activated. – Turn off the water supply.
– Contact Miele.
Frequently Asked Questions
48