Miele T8013C - Manual (Page 34)

Installation tips
An airflow gap of
3
/
8
" (10 mm) must
be provided between the machine
and the floor. This airflow gap must
not be blocked by a toe-kick or thick
piled carpets.
Sufficient venting of the installation
site, e.g. by opening a window or
door, is essential for the dryer's
operation. Otherwise drying times
and energy usage may increase.
Do not install the dryer next to a
refrigerator. The warm air which
emanates from the dryer can affect
the thermostat of the refrigerator,
causing it to run continuously.
Room ventilation
The room air, which is taken in when
the dryer is in operation, is blown out
via the exhaust grill on the bottom front.
This dry air heats the air in the room. It
is important, particularly if the room is
small, to ensure adequate ventilation.
Opening a door or window, for
example, will improve supply of cooler
air. Otherwise drying times and energy
usage may increase.
Level the dryer
^ The dryer must be level to ensure
safe and proper operation.
^ The machine can be leveled by
turning the legs clockwise or
counterclockwise as necessary.
Installation
30