Elec. stabil. prog. (electronic stability program) – Mercedes-Benz 2002 G-Class User Manual

Page 282

Advertising
background image

279

Malfunction and warning messages

Technical

data

Instruments
and controls

Operation

Driving

Instrument

cluster display

Practical hints

Car care

Index

ELEC. STABIL. PROG. (Electronic stability program)

* C = Category, see page 272

1 Transfer case differential lock is selected, the ESP is not available,

see page 243.

2 Transfer case differential lock is active, the ESP is not available,

see page 243.

3 The enhanced vehicle stability offered by ESP and the torque

reduction feature are unavailable.

4 This message may be displayed if the power supply was

interrupted (battery disconnected or empty). Synchronize ESP, see
page 244

5 The system is temporarily unavailable. The reason could be that

the self-diagnosis has not been completed. The display will clear
itself after driving a short distance at more than 12 mph (2o km/h).

6 The system is unavailable due to low voltage, e.g. battery not being

charged.

7 A malfunction has been detected in the system. In case of ESP

malfunction the ESP warning lamp in the instrument cluster
illuminates and the ESP switch in the center console does not
function. If in addition the ABS is malfunctioning, only partial
engine output will be available.

8 The display or the system is malfunctioning.

Line 1

Line 2

C*

ESP NOT ACTIVE

LOCK SELECTED

1

1

ESP NOT ACTIVE

LOCK ACTIVE

2

1

ELEC. STABIL. PROG.

NOT AVAILABLE!

3, 4, 5, 6

2

ELEC. STABIL. PROG.

VISIT WORKSHOP!

3, 7

2

DISPLAY DEFECTIVE

VISIT WORKSHOP!

8

2

J_G463.book Seite 279 Mittwoch, 19. September 2001 8:06 08

Advertising
This manual is related to the following products: