Graphic, P40.10-2136-26, Ensure proper tire pressure – Mercedes-Benz 2001 E-Class User Manual

Page 278: Table, Table body, Table row, Warning, Never apply oil or grease to wheel bolts

Advertising
background image

275

Tires, Wheels

Technical

data

Instruments
and controls

Operation

Driving

Instrument

cluster display

Practical hints

Car care

Index

11. Lower vehicle. Remove jack and insert jack tube

cover.

Before storing the jack, the jack arm must be
lowered almost to the base of the jack.

12. Using the wrench, tighten the five bolts evenly,

following the sequence illustrated, until all bolts are
tight.
Observe a tightening torque of 80 ft.lb. (110 Nm).

13. Ensure proper tire pressure.

P40.10-2136-26

3

2

4

1

5

Warning!

Always replace wheel bolts that are damaged or
rusted.

Never apply oil or grease to wheel bolts.

Damaged wheel hub threads should be repaired
immediately.

Incorrect mounting bolts or improperly tightened
mounting bolts can cause the wheel to come off.
This could cause an accident. Be sure to use the
correct mounting bolts.

Warning!

Except E 320 (without sport package):
The spare wheel rim is for temporary use only. Use
for over a total of 12 000 miles (20 000 km)
(aggregate of all uses) may cause wheel rim failure
leading to an accident and possible injuries.

Advertising
This manual is related to the following products: