Easytouch 13.pdf, 10 programming a macro, English – Marmitek EasyTouch35 User Manual

Page 13

Advertising
background image

13

EASYTOUCH 35

4. Display will show the Mode Setup Screen. Press and release

desired Mode key (TV, VCR, SAT, etc.) on the rubber
keypad.

5. Display will show the Code

Setup Screen. Press and release
Setup key.

6. Display will show the Code

Identification Screen (Initially
blank except for "SETUP",
"INFO" and "CODE" labels).
The display will now show
the code using the Touchscreen digits. The 3 digits will be
shown in sequence for 1second each followed by a
0.5 second gap where no digits are shown. This sequence
will only be carried out once then display will return to the
Main Setup Screen.

7. Code Identification is now complete. Press and release the

Touchscreen "EXIT" key to return to normal operation.

10 Programming a Macro

The Home Theatre Macro function allows you to store several
sequences of IR Commands (key presses). One press of the Macro
key will execute the whole sequence. A total number of 20
keystrokes can be stored under each of the 9 available Macro keys.

1.

Press and hold Setup key until the LED remains on
(occurring after approximately 2-3 seconds) and the
display shows the Main Setup Screen.

2.

Release Setup key.

3.

Press and release the Touchscreen "MACRO" Key.

ENGLISH

easytouch35_manual ok 6/17/03 10:30 AM Page 13

Advertising