Easytouch 19.pdf, English – Marmitek EasyTouch35 User Manual

Page 19

Advertising
background image

19

EASYTOUCH 35

4. Display will show the Mode Setup Screen. Press and release

desired Mode key (TV, VCR, SAT, etc.) on the rubber keypad.

5. Display will show the Learn

Setup Screen. This screen
comprises the current labels for
the Mode along with the
SETUP and LEARN Touchscreen
labels. Press and release the
ET35 remote key (rubber or
Touchscreen) to be taught
with the original remote key
code. Use the Touchscreen
"SCREEN" Key to toggle the
screen keys displayed.

6.

Press and hold the original remote key until the LED blinks
off once and the display shows the Learn Next Setup
Screen (this process can take up to 2 or 3 seconds to
complete). If there is a problem with learning the LED will
flash three times but still remain in the Learn routine with
the Learn Next Setup Screen displayed. To learn another
key, press and release the Touchscreen "LEARN" Key and
repeat from Step "5". To save and exit from the Learn
routine, press and release the Touchscreen "OK" Key.
Return to the Main Setup Screen.

7.

Learning now complete. Press and release the
Touchscreen "EXIT" key to return to normal operation.

To Clear all stored Learned Commands under a Mode:

1. Press and hold Setup key until

the LED remains on (occurring
after approximately 2-3
seconds) and display shows the
Main Setup Screen.

2. Release Setup key.

3. Press and release the Touchscreen "LEARN" Key.

ENGLISH

easytouch35_manual ok 6/17/03 10:30 AM Page 19

Advertising