Motorola MOTONAV TN500 Series - Manual (Page 10)

8 install the car kit
• Refrain from mounting the microphone on
door pillars or windows that can transmit
exterior wind noise to it.
• Do not attach microphone to the vehicle's
visor.
2 Route the microphone cable down the side of the
windshield, through the dash, and to the vehicle
integration kit.
3 Connect the microphone to the vehicle
integration kit connector C (shown on page 5).
selective mute feature
Whenever your car kit plays audio or a hands-free call,
it automatically disconnects (or “takes over”) the
speakers from the vehicle’s entertainment system.
However, some vehicles have features that play audio
prompts over the vehicle entertainment system (such
as audio navigation, parking sensors, etc.). In these
scenarios, you will still need to maintain an audio path
(or “channel”) to the vehicle entertainment system.
On the vehicle integration kit, the multi-position DIP
switch allows you to select a channel to remain
connected to the vehicle entertainment system during
hands-free calls.
Each position on the DIP switch corresponds to one of
the four speaker channels.
switch speaker channel
1 right - rear
2 right - front
3 left - rear
4 left - front
Selective Mute
DIP Switch
68000202400a.fm Page 8 Wednesday, August 12, 2009 6:17 PM