Motorola MOTONAV TN500 Series - Manual (Page 12)

10 mount and connect the MOTONAV device
mount and connect the MOTONAV
device
Caution: The location of the MOTONAV device must
not interfere with the vehicle's air bag deployment.
Caution: DO NOT MOUNT IN A LOCATION THAT
OBSTRUCTS DRIVER’S VISION OR INTERFERES
WITH OPERATION OF THE VEHICLE.
1 Clean mounting surface thoroughly with an
alcohol wipe (supplied).
2 If using adhesive to attach mounting arm to the
dashboard, peel tape off of the adhesive pad
(supplied) and apply to bottom of the mounting
arm.
Note: If using screws to attach the mounting arm
to the dashboard, do not use the adhesive pad.
3 Attach cradle to mounting arm.
Note: Be sure to utilize the cradle that comes
with the car kit. (The cradle included with the
MOTONAV device may not have the same
functionality.)
68000202400a.fm Page 10 Wednesday, August 12, 2009 6:17 PM