Motorola T5200 - Manual (Page 14)

Solution Problem
Troubleshooting
No Power
Erratic Display
Message Not
Received
Message Not
Transmitted
Reposition or replace batteries.
Reposition or replace batteries.
Make sure the Push-To-Talk button is completely pressed as you transmit.
Reposition or replace batteries.
Shared Channel may be in use, try another.
Confirm radios have same Channel settings and/or Interference Eliminator Code is
inactive (non T5100 radios).
Make sure Push-To-Talk is not inadvertently being pressed.
Reposition or replace batteries.
Obstructions, operating indoors or in vehicles may interfere with communication. Change
your location.
Check to make sure volume is turned up.
Shared Channel may be in use, try changing channels.
Radios with Interference Eliminator Codes (like T5200), must have codes off or set to zero
to communicate with T5100 radios.
Hearing Other
Conversation or
Noise on a
Channel
15